Virtual Host Configuration From A File - Qlogic SANsurfer FC HBA Manager Application User Manual

Q
3. The load host configuration message displays. Click OK.
The virtual host configuration displays in the HBA tree. Note that the host
configuration is displayed as offline and the icons are blue. You can still view
configuration information
4. To remove a virtual host configuration from the HBA tree, disconnect it
section
FS0054603-00 C
Figure 7-23. Virtual Host Configuration from a File
7.1.5).
Viewing a Saved Host Configuration from a File (.qlc)
(see figure 7-23).
7 – Setting Up Connections
(see
7-47