7 – Setting Up Connections
Connecting to Hosts
7.1.3.2
Using a Host Group File to Connect to Hosts
Perform the following steps to connect to a group of hosts using a previously created
host group file:
1. Do one of the following:
❑
❑
❑
2. The Open dialog box displays. Select the host group file (.hst) that contains
the hosts to which you want to connect. Click Open.
The hosts display in the SANsurfer FC HBA Manager main window HBA tree.
7.1.4
Connecting to Hosts Automatically when Starting the SANsurfer FC HBA
Manager GUI from the Command Line
NOTE:
You can connect to specified hosts automatically when starting the SANsurfer FC
HBA Manager GUI from the command line. You can connect to a single host or a
group of hosts listed in a host group file.
NOTE:
This section discusses connecting from the following systems:
Windows 2000/Windows Server 2003
■
Red Hat/SuSE Linux or Solaris SPARC
■
7-6
On the SANsurfer FC HBA Manager main window Host menu, click Open
Group.
Right-click the HBA tree. From the pop-up menu, click Open Group.
Press SHIFT+O.
For information about starting SANsurfer FC HBA Manager without
automatically connecting to hosts,
For information about creating a host group file,
see section
6.1.
see section
(see section 7.1.4.1)
(see section 7.1.4.2)
Q
7.1.3.1.
FS0054603-00 C