Q
7.4
Configuring Fibre Channel Devices
Perform the following steps to configure Fibre Channel devices:
1. From the SANsurfer FC HBA Manager main window, do the following:
a. In the HBA tree, select the host (or HBA, HBA port, device, or LUN connected
b. Do one of the following:
If SANsurfer FC HBA Manager detects an invalid configuration, the detected
invalid device and LUN configuration message displays. Click OK; auto
configure runs automatically.
Invalid configurations include:
❑
❑
The Fibre Channel Port Configuration dialog box displays
Figure 7-15. Fibre Channel Port Configuration Dialog Box
FS0054603-00 C
to the host).
Click the Configure button on the toolbar.
❑
From the Host menu, click Configure.
❑
Right-click the host, HBA, HBA port, device, or LUN in the HBA tree. From
❑
the pop-up menu, select Configure.
Press CTRL+C.
❑
A device with contradictory visible paths. Only one path can be visible at a
time.
A LUN with contradictory enabled paths. A configuration is valid when all
paths are enabled or disabled.
7 – Setting Up Connections
Configuring Fibre Channel Devices
(see figure
7-15).
7-27