7 – Setting Up Connections
Connecting to Hosts
7.1
Connecting to Hosts
The SANsurfer FC HBA Manager GUI tries to ensure that a host is not loaded more
than once into the HBA tree. If a host has multiple interfaces (for example, more
than one NIC is installed), the SANsurfer FC HBA Manager GUI will not load the
host more than once in the HBA tree if the host IP address is registered with the
DNS server or local host file.
NOTE:
This section discusses:
Connecting to hosts manually
■
Connecting to hosts automatically
■
Connecting to hosts using a host group file
■
Connecting to specified hosts automatically when starting the SANsurfer FC HBA
■
Manager GUI from the command line
Disconnecting from hosts
■
7.1.1
Manually Connecting to a Host
Perform the following steps to manually connect to a host:
1. Do one of the following:
❑
❑
❑
❑
7-2
To ensure that a host does not display more than once in the HBA tree,
register each host's IP address with the DNS server or the local host file.
Click the Connect button on the SANsurfer FC HBA Manager main window
toolbar.
On the SANsurfer FC HBA Manager main window Host menu, click
Connect.
Right-click the HBA tree. From the pop-up menu, click Connect.
Press INSERT.
(see section 7.1.1)
(see section 7.1.2)
(see section 7.1.3)
(see section 7.1.4)
(see section 7.1.5)
Q
FS0054603-00 C