Disconnecting From A Host - Qlogic SANsurfer FC HBA Manager Application User Manual

7 – Setting Up Connections
Connecting to Hosts
4. Do one of the following:
❑
❑
❑
7.1.5

Disconnecting from a Host

Perform the following steps to disconnect from a host:
1. In the SANsurfer FC HBA Manager main window HBA tree, select the host (or
HBA, HBA port, device, or LUN connected to the host) that you want to
disconnect.
2. Do one of the following:
❑
❑
❑
When the host is disconnected, it no longer displays in the HBA tree. If you are
using the auto-connect feature, the host does not auto connect. If you want to
reconnect to a disconnected host, do so manually
7-8
Type the following and then press ENTER to connect to the local host:
./SANsurfer -l
Type the following and then press ENTER to connect to a single host at start
up. hostname is the host name or IP address:
./SANsurfer -h hostname
For example:
./SANsurfer -h adsw2ksys2
Type the following and then press ENTER to connect to the hosts listed in
a group file (.hst) at start up. path is the path of the group file.
./SANsurfer -g path
For example:
./SANsurfer -g /opt/QLogic Corporation/
SANsurfer/hostfiles/group1.hst
On the Host menu, select Disconnect.
Right-click the host in the HBA tree. From the pop-up menu, select
Disconnect.
Press DELETE.
(the letter L for local)
Q
(see section 7.1.1).
FS0054603-00 C