Choose Product Features Dialog Box (Sample) - Qlogic SANsurfer FC HBA Manager Application User Manual

5 – Installing SANsurfer FC HBA Manager
Initial Installation
4. The Choose Product Features dialog box displays.
sample dialog box.
NOTE:
Figure 5-3. Choose Product Features Dialog Box (Sample)
Install only the software appropriate to your configuration. In addition,
SANsurfer FC HBA Manager supports both stand-alone and network
configurations
❑
5-6
Except for the agents that are installed, the feature options are the
same for Windows 2000/Windows Server 2003, Red Hat/SuSE
Linux, and Solaris SPARC systems.
Windows agents are installed on a Windows 2000/Windows
■
Server 2003 system
Linux agents are installed on a Red Hat/SuSE Linux system
■
Solaris agents are installed on a Solaris SPARC system
■
(see section 5.1.1
For a Windows 2000/Windows Server 2003 system, select one
preconfigured installation set from the following. Then click Next.
Select SFCHM GUI and Agent to install the SANsurfer FC HBA Manager
❑
GUI, including the SANsurfer FC HBA Manager Windows NT
4/2000/2003 agent.
Select SANsurfer Windows Agent to install only the SANsurfer FC HBA
❑
Manager Windows NT 4/2000/2003 agent.
Select SANsurfer NetWare5/6.x Agent to install only the SANsurfer FC
❑
HBA Manager Novell Netware 5/6.x (and above) agent.
See figure 5-3
for details). Do one of the following:
Q
for a
FS0054603-00 C