Broadcast Settings Dialog Box - Qlogic SANsurfer FC HBA Manager Application User Manual

7 – Setting Up Connections
Connecting to Hosts
The hosts display in the HBA tree and in the Connect to Host dialog box Enter
Hostname or IP Address box drop-down list. If, for example, the SANsurfer FC
HBA Manager agent on the host stops running, the host no longer displays in the
HBA tree.
NOTE:
Perform the following steps to auto connect to all hosts:
1. Do one of the following:
❑
❑
The Broadcast Settings dialog box displays
2. Select the Enable Broadcasting check box.
3. Select the Enable Auto Connect check box.
4. In the Broadcast Interval box, enter the number of seconds between
broadcasts. The range is 30 to 600 seconds, the default is 30 seconds.
5. Click OK to make the changes or Cancel to keep the current values.
To disable auto connecting to all hosts, clear the Enable Auto Connect check box
and click OK.
7-4
You must manually connect to a host on a different subnet
section 7.1.1).
On the SANsurfer FC HBA Manager main window Settings menu, select
Broadcast.
Press CTRL+SHIFT+B.
Figure 7-2. Broadcast Settings Dialog Box
(see
(see figure 7-2).
FS0054603-00 C
Q