6 – Getting Started
Setting the Configuration Change Alarm Option
2. In the Configuration Change Alarm section, do one of the following:
❑
❑
❑
3. Click OK to return to the SANsurfer FC HBA Manager main window.
6-12
Select Apply Configuration Changes Automatically to have the
SANsurfer FC HBA Manager GUI automatically update to the new
configuration.
If another host has made configuration changes that need to be updated in
this configuration, the configuration change—reloading message displays.
Click OK.
Select Confirm Configuration Change Applies if you want to decide
whether to update to the new configuration.
If a configuration change occurs, the configuration change—refresh
confirmation message displays. Do one of the following:
Click Yes to refresh the configuration.
❑
Click No to not update to the new configuration. The old configuration
❑
continues to display. To update to the current configuration, manually
connect and disconnect the host
Select Ignore Configuration Changes if you want to ignore the
configuration change alarm. The old configuration continues to display. To
update to the current configuration, manually connect and disconnect the
host
(see section
7).
(see section
7).
Q
FS0054603-00 C
Need help?
Do you have a question about the SANsurfer FC HBA Manager Application and is the answer not in the manual?