Setting Up Connections - Qlogic SANsurfer FC HBA Manager Application User Manual

You can connect to and configure local and remote systems. This section discusses:
Connecting to one or multiple hosts
■
Configuring Fibre Channel devices using wizards. Wizards simplify the
■
configuration process.
❑
❑
Configuring Fibre Channel devices without using wizards. This is for advanced
■
users who want to customize the configuration of the HBAs and their connected
devices. This process contains settings in addition to those available when using
wizards.
❑
❑
❑
❑
❑
❑
Viewing a saved host configuration, printing a host configuration, and comparing
■
host configurations:
❑
❑
❑
❑
FS0054603-00 C

Setting Up Connections

Configuring HBA ports and binding target devices using the General
Configuration Wizard
Configuring LUN masking using the LUN Masking Wizard
Configuring Fibre Channel devices without using wizards
Configuring LUNs for a device
Viewing HBA port and device information
Binding target devices using the Fibre Channel Port Configuration dialog
box (see section 7.7)
Binding target devices using the Target Persistent Binding tabbed page
(see section 7.8)
Deleting persistent configuration data
Viewing a saved host configuration from a file (.qlc)
Viewing a saved host configuration from a text file (.txt)
Printing a host configuration
Comparing host configurations
Section 7
(see section 7.1)
(see section 7.2)
(see section 7.5)
(see section 7.9)
(see section 7.12)
(see section 7.13)
(see section 7.3)
(see section 7.4)
(see section 7.6)
(see section 7.10)
(see section 7.11)
7-1