Setting The Warning Display Option; Options Dialog Box—Warning Displays Section - Qlogic SANsurfer FC HBA Manager Application User Manual

6 – Getting Started

Setting the Warning Display Option

4. In the Application Access section, do the following to modify the SANsurfer FC
HBA Manager access password:
a. In the Old Password box, type the current password.
b. In the New Password box, type the new password.
c. In the Verify Password box, type the new password again to confirm the
5. Do one of the following:
❑
❑
6.6
Setting the Warning Display Option
You can configure the SANsurfer FC HBA Manager GUI to display warning dialog
boxes when certain conditions occur. Perform the following steps to set the warning
display option:
1. Do one of the following:
❑
❑
❑
The Options dialog box displays
Figure 6-6. Options Dialog Box—Warning Displays Section
6-10
new password.
Click Apply to update the application access password.
Click Clear Fields to clear the typed entries in the Security tabbed page
text boxes.
On the SANsurfer FC HBA Manager main window Settings menu, select
Options.
Right-click the HBA tree. From the pop-up menu, click Options.
Press CTRL+SHIFT+O.
(see figure 6-6).
Q
FS0054603-00 C