Deleting Device Persistent Configuration Data; Fibre Persistent Configuration Editor For Devices - Qlogic SANsurfer FC HBA Manager Application User Manual

7 – Setting Up Connections
Deleting Persistent Configuration Data
2. Do one of the following:
❑
NOTE:
❑
7.9.2

Deleting Device Persistent Configuration Data

NOTE:
Perform the following steps to delete the persistent configuration data for a device
and its LUNs:
1. Do one of the following:
❑
❑
The Fibre Persistent Configuration Editor displays the devices
figure
Figure 7-22. Fibre Persistent Configuration Editor for Devices
For each device connected to the HBA port, the Fibre Persistent
Configuration Editor displays the device number and device world wide node
name.
7-44
Delete one or more entries as follows:
a. Select the HBA port entries that you want to delete.
b. Click Delete to remove the entries.
c. The Security Check dialog box displays. In the Enter Password box,
type the password. Click OK.
Changes made to the persistent configuration are final. If you do
not want the changes, reconfigure the host
Click Cancel to not delete an entry.
This option is not available on Solaris SPARC.
From the SANsurfer FC HBA Manager main window HBA tree, right-click
the device (or LUN connected to the device). From the pop-up menu, select
Device Persistent Configuration Data.
From the Fibre Channel Port Configuration dialog box Device menu,
select Persistent Configuration Data.
7-22).
Q
(see section 7.2).
(see
FS0054603-00 C