Device Icons And Text - Qlogic SANsurfer FC HBA Manager User Manual

A

Device Icons and Text

The FC/CNA HBA tree shows the following information about disks, tapes, and
SAFTE devices:
Device type: Disk, tape, or SAFTE (used for enclosure information).
Device port ID: Port ID of the disk, tape, or SAFTE device.
Online/Inactive Status: A circled red X on the icon indicates an inactive
device (either the device is down, the port on device is down or inactive, or
the device is not responding properly to SCSI commands).
Diagnostics enabled/disabled for read/write buffer test: A green check
mark on the icon and the text Diag Enabled indicate enabled. For more
information, see
Beacon Flashing: Flash Beacon: LED beacon flashing function is enabled
(see "Finding a Target" in the help system)
Examples:
Device Icons
The disk icons are:
The SAFTE device icons are:
SN0054651-00 G
"Preparing for Diagnostic Testing" on page
Disk (50-06-0E-83-00-00-2B-21):Online, Diag Disabled
Disk (21-00-00-04-CF-92-7A-B1):Online, Diag Enabled
Tape (10-00-00-04-32-72-06-64):Inactive, Diag Disabled
Disk Online, Diag Enabled
Disk Online, Diag Disabled
Disk Inactive, Diag Enabled
Disk Inactive, Diag Disabled
Offline. Disk on offline host
SAFTE device
Offline. SAFTE device on offline host
SANsurfer FC HBA Manager Main Window
The tape icons are:
Tape, Diag Enabled
Tape, Diag Disabled
Tape Inactive, Diag Enabled
Tape Inactive, Diag Disabled
Offline. Tape on offline host
Getting Started
6-2.
5-11