Viewing And Configuring Ports By Vlan - Extreme Networks Summit WM3000 Series Reference Manual

Network Setup
4 Use the Edit screen to modify the VLAN's mode, access VLAN and allowed VLAN designation.
5 Use the Edit screen to modify the following:
Name
Mode
Access VLAN
Allowed VLANs
6 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
7 Click OK to use the changes to the running configuration and close the dialog.
8 Click Cancel to close the dialog without committing updates to the running configuration.

Viewing and Configuring Ports by VLAN

A Virtual Local Area Network (VLAN) is a controller network segmented by function or application rather
than a traditional LAN segmentation (based on physical location). VLANs allow a greater level of
96
Displays a read only field and with the name of the Ethernet to which the
VLAN is associated.
Use the drop-down menu to select the mode. It can be either:
Access
• – This Ethernet interface accepts packets only from the native
VLANs. If this mode is selected, the Allowed VLANs field is
unavailable.
• Trunk –The Ethernet interface allows packets from the given list of
VLANs you can add to the trunk.
Use this field to change the tag assigned to the native VLAN.
This section has the following 2 options (and is only available when Trunk
is selected from the Mode drop-down menu):
No VLANs
• – Select this option if you do not wish to add any additional
VLANs.
• Selected VLANs – Select this option if you wish to add additional
VLANs.
Summit WM3000 Series Controller System Reference Guide