Extreme Networks Summit WM3000 Series Reference Manual page 56

Controller Information
Name
Speed
Duplex
Channel Group
Description
Admin Status
Medium
Use DHCP to obtain
IP address
automatically
IP Address
Subnet Mask
Read-only details about the port's cabling connection also display within the Edit screen. This
information should be used to determine the configuration defined for this port.
5 Click the OK button to commit the changes made to the port configurations.
6 Click Cancel to disregard any changes and revert back to the last saved configuration.
56
Displays the read-only name assigned to the port.
Select the speed at which the port can receive and transmit the data.
Select from the following range:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
• Auto
Modify the duplex status by selecting one of the following options:
• Half
• Full
• Auto
Channel Group
Optionally, set the
bundles individual Ethernet links (over the selected channel) into a single
logical link that provides bandwidth between the controller and another
controller or host. The port speed used is dependant on the Duplex value
selected (full, half or auto). If a segment within a channel fails, traffic
previously carried over the failed link is routed to the remaining segments
within the channel. A trap is sent upon a failure identifying the controller,
channel and failed link.
Enter a brief description for the port. The description should reflect the
port's intended function to differentiate it from others with similar
configurations.
Either Enable (activate) or Disable (shutdown) the admin status of the
port.
Displays the current (read-only) connection medium used by this port.
Select to enable use of DHCP to assign IP address for this port.
If 'Use DHCP to obtain IP address automatically' is not selected, then use
this field to enter the static IP address assigned to this port.
If 'Use DHCP to obtain IP address automatically' is not selected, then use
this field to enter the subnet mask for the IP address.
defined for the port. The controller
Summit WM3000 Series Controller System Reference Guide