Chapter 3: Controller Web Ui Access And Image Upgrades; Web Ui Requirements; Accessing The Summit Wm Controller For The First Time - Extreme Networks Summit WM3000 Series Reference Manual

3 Controller Web UI Access and Image Upgrades
The content of this chapter is segregated amongst the following:
Web UI Requirements on page 35
●
Controller Password Recovery on page 38
●
Upgrading the Controller Image on page 39
●
Auto Installation on page 39
●

Web UI Requirements

The controller Web UI is accessed using Internet Explorer version 5.5 (or later) and SUN JRE (Java
Runtime Environment) 1.5 (or later). Refer to the Sun Microsystems Web site for information on
downloading JRE.
NOTE
To successfully access the controller Web UI through a firewall, UDP port 161 must be open in order for the
controller's SNMP backend to function.
To prepare Internet Explorer to run the Web UI:
1 Open Internet Explorer's Tools > Internet Options panel and select the Advanced tab.
2 Uncheck the following checkboxes:
Use HTTP 1.1
●
Java console enabled (requires restart)
●
Java logging enabled
●
JIT compiler for virtual enabled (requires restart).
●

Accessing the Summit WM Controller for the First Time

You can access the Summit WM Controller using a laptop computer with a Web browser.
To access the controller using a web-enabled laptop:
1 Connect the controller's management port to a web-enabled laptop computer using a cross-over RJ
45 Ethernet cable.
NOTE
The default IP address of the controller's management port is 10.1.1.100. The subnet mask is 255.0.0.0. The
default login user name is admin and the default login password is admin123.
Summit WM3000 Series Controller System Reference Guide
35