Extreme Networks Summit WM3000 Series Reference Manual page 141

5 Specify a 4 to 32 character Pass Key and click the Generate button.
The pass key can be any alphanumeric string. The controller, other proprietary routers and the
Motorola MUs which are supported by the Summit WM3000 series controller. use the algorithm to
convert an ASCII string to the same hexadecimal number. Other MUs need to use WEP keys
manually configured as hexadecimal numbers.
6 Use the Key #1-4 areas to specify key numbers.
The key can be either a hexadecimal or ASCII. For WEP 64 (40-bit key), the keys are 10 hexadecimal
characters in length or 5 ASCII characters. Select one of these keys for activation by clicking its radio
button.
Default (hexadecimal) keys for WEP 64 include:
Key 1
Key 2
Key 3
Key 4
7 If you feel it necessary to restore the WEP algorithm back to its default settings, click the Restore
Default WEP Keys button. This may be the case if you feel the latest defined WEP algorithm has been
compromised and longer provides its former measure of data security.
8 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
9 Click OK to use the changes to the running configuration and close the dialog.
10 Click Cancel to close the dialog without committing updates to the running configuration.
Summit WM3000 Series Controller System Reference Guide
1011121314
2021222324
3031323334
4041424344
141