Configuring Management Users; Configuring Local Users - Extreme Networks Summit WM3000 Series Reference Manual

Controller Management
3 Create a new (non DNS name) destination IP Address for the new trap receiver to be used for
receiving the traps sent by the SNMP agent.
4 Define a Port Number for the trap receiver.
5 Use the Protocol Options drop-down menu to specify the trap receiver as either a SNMP v2c or v3
receiver.
6 Click OK to save and add the changes to the running configuration and close the dialog.
7 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
8 Click Cancel to close the dialog without committing updates to the running configuration.

Configuring Management Users

Refer to the Users screen to view the administrative privileges assigned to different controller users. You
can modify the roles and access modes assigned to each user. The Users screen also allows you to
configure the authentication methods used by the controller. Use this screen for the following
permission configuration activities:

Configuring Local Users

●
Configuring Controller Authentication
●
Additionally, the controller Web UI has the facility for creating guest administrators for creating guest
users with defined login periods to specific guest groups. For more information, see
Admin and Guest User" on page
Configuring Local Users
Refer to the Local Users tab to view the administrative privileges assigned to users, create a new user
and configure the associated roles and access modes assigned to each user.
To configure the attributes of Local User Details:
442
447.
Summit WM3000 Series Controller System Reference Guide
"Creating a Guest