Extreme Networks Summit WM3000 Series Reference Manual page 208

Network Setup
12 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
13 Click OK to use the changes to the running configuration and close the dialog.
14 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Rate Settings. Use the Rate Settings screen to define a set of basic and supported rates for the
target radio. This allows the radio to sync with networks using varying data rates and allows the radio
to default to a predefined set of data rates when higher data rates cannot be maintained.
To configure a radio's rate settings:
1 Click the Rate Settings button in the radio edit screen to launch a screen wherein rate settings can be
defined for the radio.
2 Check the boxes next to all Basic Rates you want supported by this radio.
Basic Rates are used for management frames, broadcast traffic and multicast frames. If a rate is
selected as a basic rate it is automatically selected as a supported rate.
3 Check the boxes next to all Supported Rates you want supported by this radio.
208
Summit WM3000 Series Controller System Reference Guide