Extreme Networks Summit WM3000 Series Reference Manual page 37

To define basic controller settings using the controller's GUI:
1 Select Controller from the main menu tree.
2 Click the Configuration tab.
3 Refer the System field to define the following basic controller settings:
Displays the designated system name. Provide a system name serving as
System Name
a reminder of the user base the controller supports (engineering, retail,
etc.).
The
Location
be found. Define the System Name as a specific identifier of the
controller's location. Use the System Name and Location parameters
together to optionally define the controller name by the radio coverage
type it supports and physical location. For example, "second floor
engineering."
Displays a
Contact
This name should be the network administrator responsible for controller
operations.
Displays the current operational time for the device name defined within
Uptime
the System Name field. Uptime is the cumulative time since the
controller was last rebooted or lost power.
Displays the current firmware version running on the controller. This
Firmware
version should be periodically compared to the most recent version
available on the Extreme Networks Web site, as versions with increased
functionality are periodically released.
Displays the number of Access Point licenses currently available for the
AP Licenses
controller. This value represents the maximum number of Access Points
the controller is licensed to adopt.
Summit WM3000 Series Controller System Reference Guide
Location
parameter serves as a reminder of where the controller can
Contact
value for system administration and troubleshooting.
37