Extreme Networks Summit WM3000 Series Reference Manual page 125

NOTE
In multi-controller hotspot environments if a single controller's internal pages are configured for authentication
on the other controllers, those controllers will redirect to their own internal pages instead. In these environments
is recommended to use an external server for all of the controllers.
8 Check the Use System Name in Hotspot URL to use the System Name specified on the main Controller
configuration screen as part of the hotspot address.
9 Check the Logout on Browser Close button to logout hotspot users from the network when they close
their web browsers.
10 Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent unique
hotspot users for the selected WLAN.
11 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
12 Click OK to use the changes to the running configuration and close the dialog.
13 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring an External Hotspot. Selecting the external option entails hosting your own external Web
server using advanced Web content (using XML, Flash). To create a hotspot maintained by an external
server:
1 Select Network > Wireless LANs from the main menu tree.
2 Select an existing WLAN from those displayed within the Configuration tab and click the Edit button.
Summit WM3000 Series Controller System Reference Guide
125