Extreme Networks Summit WM3000 Series Reference Manual page 98

Network Setup
3 Highlight an existing VLAN and click the Edit button. The system displays a Port VLAN Change
Warning message. Be advised, changing VLAN designations could disrupt access to the controller.
4 Click OK to continue. A new window displays wherein the VLAN assignments can be modified for
the selected VLAN.
NOTE
The ports available vary by controller.
On the Summit WM3600, the available ports are ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8 and up1.
On the Summit WM3700, the available ports are ge1, ge2, ge3 and ge4.
5 Change VLAN port designations as required.
6 Click OK to use the changes to the running configuration and close the dialog.
7 Click Cancel to close the dialog without committing updates to the running configuration.
98
Summit WM3000 Series Controller System Reference Guide