Viewing Ping Statistics - Extreme Networks Summit WM3000 Series Reference Manual

Diagnostics
Timeout(sec)
Frequency
4 Click OK to save and add the changes to the running configuration and close the dialog.
5 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller
6 Click Cancel to return back to the Configuration tab without implementing changes.

Viewing Ping Statistics

Refer to the Statistics tab for an overview of the overall success of the ping test with the destination IP
addresses displayed within the screen. Use this information to determine whether the destination IP
represents a device offering the controller a viable connection to either extend the controller's existing
radio coverage area or provide support for additional MUs within an existing network segment.
To view ping test statistics:
1 Select Diagnostics > Ping from the main menu.
2 Select the Statistics tab.
3 Refer to the following content within the Statistics tab to assess the connection with the target device:
476
Configure the timeout value (in seconds) used to timeout the ping test if
a round trip packet is not received from the target device. Ensure this
interval is long enough to account for network congestion between the
controller and its target device.
Define the interval (in seconds) between ping packet transmissions.
Define a longer interval if high levels of network congestion are
anticipated between the controller and its target device. Use a value of 0
to execute a single ping test or stop a currently running ping test.
Summit WM3000 Series Controller System Reference Guide