Extreme Networks Summit WM3000 Series Reference Manual page 297

3 Refer to the following within the Recently Found Devices screen to discern whether a located device
should be deleted from the list or selected to have its Web UI launched and its current configuration
modified.
IP Address
Software Version
Product
Redundancy Group ID If the discovered device is part of a redundancy group, its cluster ID
Device Name
Device Location
Summit WM3000 Series Controller System Reference Guide
Displays the IP address of the discovered controller. This IP address
obviously falls within the range of IP addresses specified for the discovery
profile used for the device search. If the IP addresses displayed do not
meet your search expectations, consider creating a new discovery profile
and launching a new search.
Displays the software version running on the discovered device.
Displays the name of the device discovered by the device search. If the
list of devices discovered is unsatisfactory, consider configuring a new
discovery policy and launching a new search.
displays within this column. The Redundancy ID would have been
assigned using the Controller > Redundancy screen.
Displays the device name assigned to the discovered device. This name
would have been assigned using the Controller > Configuration screen.
Displays the device location defined to the discovered device. The
location would have been assigned using the Controller > Configuration
screen.
297