Extreme Networks Summit WM3000 Series Reference Manual page 440

Controller Management
1 Select Management Access > SNMP Trap Receivers from the main menu tree.
2 Refer to the following SNMP trap receiver data to assess whether modifications are required.
Destination Address
Port
Community String/
User Name
Trap Version
3 Highlight an existing Trap Receiver and click the Edit button to display a sub-screen used to modify
the v2c or v3 Trap Receiver.
Edit Trap Receivers as needed if existing trap receiver information is insufficient. You can only
modify the IP address, port and v2c or v3 trap designation within the Edit screen. For more
information, see
4 Highlight an existing Trap Receiver and click the Delete button to remove the Trap Receiver from the
list of available destinations available to receive SNMP trap information.
Remove Trap Receivers as needed if the destination address information is no longer available on the
system.
5 Click the Add button to display a sub-screen used to assign a new Trap Receiver IP Address, Port
Number and v2c or v3 designation to the new trap.
Add trap receivers as needed if the existing trap receiver information is insufficient. For more
information, see
440
Destination Address
The
destination IP address for receiving traps sent by the SNMP agent.
Port
The specifies a destination User Datagram Protocol (UDP) receiving
traps.
Displays the Community String and User Name specific to the SNMP-
capable client that receives the traps. The community name is public.
Trap Version
The defines the trap version (v1/2 or v3) defined by the
SNMP-capable client receiving the trap. A trap designation cannot be
modified.
"Editing SNMP Trap Receivers" on page
"Adding SNMP Trap Receivers" on page
defines the numerical (non DNS name)
441.
441.
Summit WM3000 Series Controller System Reference Guide