Configuring Wlan Assignment - Extreme Networks Summit WM3000 Series Reference Manual

Supported Rates allow an 802.11 network to specify the data rate it supports. When a station
attempts to join the network, it checks the data rate used on the network. If a rate is selected as a
basic rate it is automatically selected as a supported rate.
4 Click the Clear all rates button to uncheck all of the Basic and Supported rates.
5 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
6 Click OK to use the changes to the running configuration and close the dialog.
7 Click Cancel to close the dialog without committing updates to the running configuration.

Configuring WLAN Assignment

Use the WLAN Assignment tab to assign WLANs and security schemes.
To view existing WLAN Assignments:
1 Select Network > Access Point Adoption Defaults from the main menu tree.
2 Click the WLAN Assignment tab.
The Assigned WLANs tab displays two fields: Select Radios/BSS and Select/Change Assigned WLANs.
3 With the Select Radios/BSS field, select the radio type to configure (802.11a or 802.11bg) from the Select
Radio drop-down menu.
4 Select the desired BSS from the BSS list or select a Radio (802.11a or 802.11bg) to modify.
Summit WM3000 Series Controller System Reference Guide
209