Extreme Networks Summit WM3000 Series Reference Manual page 444

Controller Management
3 Enter the login name for the user in the Username field. Ensure this name is practical and identifiable
to the user.
4 Enter the authentication password for the new user in the Password field and reconfirm the same
again in the Confirm Password field.
5 Select the role you want to assign to the new user from the options provided in the Associated Roles
panel. Select one or more of the following options:
Monitor
Help Desk Manager
Network
Administrator
System Administrator Select
Web User
Administrator
444
Monitor
Select to assign regular user permissions without any
administrative rights. The Monitor option provides
Assign this role to someone who typically troubleshoots and debugs
problems reported by the customer. The Help Desk Manager typically runs
troubleshooting utilities (like a sniffer), executes service commands,
views/retrieves logs and reboots the controller.
Network Administrator
The
wireless parameters like IP config, VLANs, Layer 2/Layer 3 security,
WLANs, radios and hotspot.
System Administrator
settings like NTP, boot parameters, licenses, perform image upgrade, auto
install, manager redundancy/clustering and control access.
Web User Administrator
Assign
authentication (hotspot).
read-only
has privileges to configure all wired and
to allow the user to configure general
privileges to add users for Web
Summit WM3000 Series Controller System Reference Guide
permissions.