Configuring Snmp Trap Receivers - Extreme Networks Summit WM3000 Series Reference Manual

# Threshold Name Condition
5 Non Unicast Greater than
Packets
6 Transmitted Greater than
Packet dropped
7 Transmitted Greater than
Packet Average
retries
8 Undecrypted Greater than
received packets
9 Total MUs Greater than
10 Average Noise Worse Than
Level

Configuring SNMP Trap Receivers

Refer to the Trap Receivers screen to review the attributes of existing SNMP trap receivers (including
destination address, port, community and trap version). A new v2c or v3 trap receiver can be added to
the existing list by clicking the Add button.
To configure the attributes of SNMP trap receivers:
Summit WM3000 Series Controller System Reference Guide
Station Range Radio Range
A decimal A decimal
number number
greater than greater than
0.00 and less 0.00 and less
than or equal than or equal
to 100.00 to 100.00
A decimal A decimal
number number
greater than greater than
0.00 and less 0.00 and less
than or equal than or equal
to 100.00 to 100.00
A decimal A decimal
number number
greater than greater than
0.00 and less 0.00 and less
than or equal than or equal
to 16.00 to 16.00
A decimal A decimal
number number
greater than greater than
0.00 and less 0.00 and less
than or equal than or equal
to 100.00 to 100.00
N/A N/A
A decimal N/
A in the range
<1-1000>
A decimal A decimal
number less number less
than -0.00 than -0.00
and greater and greater
than or equal than or equal
to -120.00 to -120.00
WLAN Range Wireless
Controller
Range
A decimal N/A
number
greater than
0.00 and less
than or equal
to 100.00
A decimal N/A
number
greater than
0.00 and less
than or equal
to 100.00
A decimal N/A
number
greater than
0.00 and less
than or equal
to 16.00
A decimal N/A
number
greater than
0.00 and less
than or equal
to 100.00
N/A A decimal
number in
A decimal N/
the range <1-
A in the
1000>
range <1-
1000>
A decimal N/A
number less
than -0.00
and greater
than or equal
to -120.00
Units
%
%
Retrie
s
%
Count
dBm
439