Extreme Networks Summit WM3000 Series Reference Manual page 128

Network Setup
To use the Advanced option to define the hotspot:
1 Select Network > Wireless LANs from the main menu tree.
2 Select an existing WLAN from those displayed within the Configuration tab.
3 Click the Edit button.
4 Select the Hotspot button from within the Authentication field.
Ensure Advanced is selected from within the This WLAN's Web Pages are of the drop-down menu.
NOTE
Advanced hotspot configuration is not permissible using the controller Web UI. Refer to the controller CLI or
other advanced configuration options to define a hotspot with advanced properties. However, the controller can
still install and maintain directories containing Web page content.
5 Once the properties of the advanced hotspot have been defined, the file can be installed on the
controller and used to support the hotspot. The following parameters are required to upload the file:
128
Summit WM3000 Series Controller System Reference Guide