Extreme Networks Summit WM3000 Series Reference Manual page 151

4 Refer to the Packet Rates field to review the number of packets both transmitted (Tx) and received
(Rx) at data rates from 1.0 to 54.0 Mbps. If a large number of packets are sent and received at a
slower data rate, then perhaps the controller is not adequately positioned or configured to support
the MUs within that WLAN.
NOTE
The Extreme Networks wireless LAN controller management software is recommended to plan the deployment of
the controller. Extreme Networks WMS can help optimize the positioning and configuration of a controller in
respect to a WLAN's MU throughput requirements. For more information, refer to the Extreme Networks Web site.
5 Refer to the Retry Counts field to review the number packets requiring retransmission from the
controller.
6 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
7 Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
8 Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.
Summit WM3000 Series Controller System Reference Guide
151