Extreme Networks Summit WM3000 Series Reference Manual page 133

To configure the format of MAC addresses used in MAC Authentications:
1 Select Network > Wireless LANs from the main menu tree.
2 Select an existing WLAN from those displayed within the Configuration tab.
3 Click the Edit button.
4 Select the MAC Authentication button from within the Authentication field.
This enables the Radius button at the bottom of the Network > Wireless LANs > Edit screen.
5 Click the Config button next to the MAC Authentication option to open a dialogue where the format
of MAC Addresses can be configured.
The MAC Authentication Format setting determines the text format that MAC addresses are
transmitted when using MAC-Auth authentication
6 Select a format for MAC Addresses used in MAC Authentication:
No delimiter: The 12 digit MAC Address is in a format with no spaces or delimeters.
●
Colin delimiter: The 12 digit MAC Address is in a format separated by colons after every pair.
●
Dash delimiter: The 12 digit MAC Address is in a format separated by dashes after every pair.
●
Dot delimiter per four: The 12 digit MAC Address is in a format separated by periods after every
●
four digits.
Middle Dash delimiter: The 12 digit MAC Address is in a format separated in the middle by a dash.
●
7 Click OK to use the changes to the running configuration and close the dialog.
8 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring External Radius Server Support. If either the EAP 802.1x, Hotspot or Dynamic MAC ACL
options have been selected as an authentication scheme for a WLAN, the Radius Config... button at the
bottom of the Network > Wireless LANs > Edit becomes enabled. The Radius Configuration screen
provides users the option of defining an external primary and secondary Radius Server as well as a
NAC Server if you do not use the controller's resident Radius Server.
Summit WM3000 Series Controller System Reference Guide
133