Extreme Networks Summit WM3000 Series Reference Manual page 381

3 Refer to the Configuration field to define the following:
DNS Server
WINS Server
Apply
Revert
4 Click the IP Range tab to view the following:.
Index
Starting IP Address
Ending IP Address
5 Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses
displayed.
6 Select an IP address range index and click the Delete button to remove this range from those
available within the IP Range tab.
Summit WM3000 Series Controller System Reference Guide
Enter the numerical IP address of the DNS Server used to route
information to the remote destination of the IPSec VPN.
Enter the numerical IP address of the WINS Server used to route
information to the remote destination of the IPSec VPN.
Apply
Click to save any updates made to the screen.
Click the Revert button to disregard changes and revert back to the last
saved configuration.
Enter the index assigned to the range of IP addresses displayed in the
Starting and Ending IP Address ranges. This index is used to differentiate
the index from others with similar IP addresses.
Enter the numerical IP address used as the starting address for the range
defined. If the Ending IP address is left blank, only the starting address
is used for the remote destination.
Enter a numerical IP address to complete the range. If the Ending IP
address is blank, only the starting address is used as the destination
address.
381