Nac Configuration Examples Using The Controller Cli; Creating An Include List - Extreme Networks Summit WM3000 Series Reference Manual

Network Setup
4 Map the selected list item with as many WLANs as needed (be selecting the WLAN's checkbox). Use
the Select All button to associate each WLAN with the selected list item.
5 To remove the WLAN Mappings, select the Deselect All button to clear the mappings.
6 Refer to the Status field for a display of the current state of the requests made from the applet.
Requests are any "SET/GET" operation from the applet. The Status field displays error messages if
something goes wrong in the transaction between the applet and the controller.
7 Click OK to save and add the new configuration and close the dialog window.
8 Click Cancel to close the dialog without committing updates to the running configuration.

NAC Configuration Examples Using the Controller CLI

The following are NAC include list, exclude list and WLAN configuration examples using the controller
CLI interface:

Creating an Include List

Since few devices require NAC, Extreme Networks recommends using the "bypass-nac-except-include-
list" option. Refer to the commands below to create a NAC Include List:
1 Create a NAC include list.
WLANController(config-wireless) #client include-list Desktop
164
Summit WM3000 Series Controller System Reference Guide