Controller Security
ACLs - existing access lists
●
Associated Rules - allow/deny rules
●
The ACLs field displays the list of ACLs currently associated with the controller. An ACL contains an
ordered list of ACEs. Each ACE specifies a permit or deny designation and a set of conditions the
packet must satisfy to match the ACE. Because the controller stops testing conditions after the first
match, the order of conditions in the list is critical.
6 If an existing ACL no longer satisfies controller access control requirements, select it from amongst
the existing ACLs and click the Delete button.
7 Use the Add button (within the ACLs field) to add an additional ACL. For more information, see
"Adding a New ACL" on page
8 To reset the Hit Count number, click the Clear button.
9 Refer to the Associated Rules field to assess the rules and precedence associated with each ACL. If
necessary, rules and can be added or existing rules modified. For more information, see
New ACL Rule" on page
Adding a New ACL
When a packet is received by the controller, the controller compares the packet against the ACL to
verify the packet has the required permissions to be forwarded. Often, ACLs need to be added as client
permission changes during controller operation.
To create a new ACL:
324
324.
325.
Summit WM3000 Series Controller System Reference Guide
"Adding a