Summit Wm3700 Controller Dashboard - Extreme Networks Summit WM3000 Series Reference Manual

5 The File Systems section displays the free file system available for:
flash
●
nvram
●
system
●

Summit WM3700 Controller Dashboard

The Dashboard screen displays the current health of the controller and is divided into fields representing
the following important diagnostics:
Alarms
●
Ports
●
Environment
●
CPU/Memory
●
File Systems
●
Apart from the sections mentioned above, it also displays the following status:
Redundancy State
Firmware
Management IP
Access Points
Mobile Units
Up Time
1 Refer to the Alarms field for details of all the unacknowledged alarms generated during the past 48
hours. The alarms are classified as:
Critical — Denoted by a red indicator. These alarms warrant immediate attention.
●
Major — Denoted by a yellow indicator. These alarms warrant attention.
●
Others — Denoted by a blue indicator.
●
Summit WM3000 Series Controller System Reference Guide
Displays the Redundancy State of the controller. The status can be either
Enabled or Disabled.
• Enabled - Defined a green state.
Disabled
• - Defined by a yellow state.
Displays the Firmware version of the current software running on the
wireless controller.
Displays the Management IP address of the controller.
Displays the total number of Access Points adopted by the controller.
Displays the total number of MUs associated with the controller.
Displays the actual controller uptime. The
operational time of the device defined within the System Name field.
Uptime is the cumulative time since the controller was last rebooted or
lost power.
Uptime is the current
49