Editing Wmm Settings - Extreme Networks Summit WM3000 Series Reference Manual

DSCP to Access
Category

Editing WMM Settings

WLAN WMM configuration affects your upstream traffic parameters. Use
page 196 to configure downstream traffic parameters. Use the WMM Edit screen to modify existing
Access Category settings for the WLAN selected within the WMM screen. This could be necessary in
instances when data traffic has changed and high-priority traffic (video and voice) must be accounted
for by modifying AIFSN Transmit Ops and CW values.
To edit existing WMM Settings:
1 Select Network Setup > WLAN Setup from the main menu tree.
2 Click the WMM tab.
3 Select a Access Category from the table and click the Edit button to launch a dialog with WMM
configuration for that radio.
4 Refer to the Edit WMM screen for the following information:
Summit WM3000 Series Controller System Reference Guide
Set the access category accordingly in respect to its DSCP importance for
this WLAN's target network traffic.
Differentiated Services Code Point
enables different levels of service to be assigned to network traffic. This
is achieved by marking each packet on the network with a DSCP code
and appropriating to it the corresponding level of service or priority. QoS
enabled programs request a specific service type for a traffic flow through
generic QoS application programming interface
the (GQoS)
(DSCP) is a field in an IP packet that
(API).
"Configuring WMM" on
155