Extreme Networks Summit WM3000 Series Reference Manual page 437

3 Refer to the following information for thresholds descriptions, conditions, editable threshold values
and units of measurement.
Threshold Name
(Description)
Threshold Conditions Displays the criteria used for generating a trap for the specific event. The
Threshold values for:
MU
Threshold values for:
AP
Threshold values for:
WLAN
Threshold values for:
Controller
Summit WM3000 Series Controller System Reference Guide
Displays the target metric for the data displayed to the right of the item.
It defines a performance criteria used as a target for trap configuration.
Threshold conditions appear as greater than, less then or worse then and
define a baseline for trap generation.
Displays a threshold value for associated MUs. Use the
Threshold Conditions
and as input criteria to define an appropriate
Threshold Value unique to the MUs within the network. For information
on specific values, see "Wireless Trap Threshold Values" on page
Set a threshold value for adopted APs. Use the
Threshold Conditions
as input criteria to define an appropriate Threshold
Value unique to the APs within the network. For information on specific
values, see "Wireless Trap Threshold Values" on page
Threshold Name
Use the and
define an appropriate Threshold Value unique to the controller. For
information on specific values, see
page 438.
Use the Threshold Name and
define an appropriate Threshold Value unique to the controller. For
information on specific values, see
page 438.
Threshold Name
Threshold Name
438.
Threshold Conditions
as input criteria to
"Wireless Trap Threshold Values" on
Threshold Conditions as input criteria to
"Wireless Trap Threshold Values" on
438.
and
437