Extreme Networks Summit WM3000 Series Reference Manual page 195

1 Select Network > Access Point Radios from the main menu tree.
2 Click the WLAN Assignment tab.
3 Select a radio from the table and click the Edit button.
The Select Radio/BSS field displays the WLANs associated to each of the BSSIDs used by the radios
within the radio table. Use Select/Change Assigned WLANs field to edit the WLAN assignment.
4 Use the Primary WLAN drop-down menu to select a Primary WLAN used for mapping enabled
WLANs.
5 Select any of the WLANs available within the table to assign them to the selected Primary WLAN.
6 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
7 Click the Apply button to save the modified WLAN assignment.
8 Click Close to exit the screen without committing updates to the running configuration.
Summit WM3000 Series Controller System Reference Guide
195