Extreme Networks Summit WM3000 Series Reference Manual page 129

a Specify a source hotspot configuration file. The file used at startup automatically displays within
the File parameter.
b Refer to the Using drop-down menu to configure whether the hotspot file transfer is conducted
using FTP or TFTP.
c Enter the IP Address of the server or system receiving the source hotspot configuration. Ensure the
IP address is valid or risk jeopardizing the success of the file transfer.
d If using FTP, enter the User ID credentials required to transfer the configuration file from a FTP
server.
e If using FTP, enter the Password required to send the configuration file from an FTP server.
f Specify the appropriate Path name to the hotspot configuration on the local system disk or server.
g Once the location and settings for the advanced hotspot configuration have been defined, click
the Install button to use the hotspot configuration with the controller.
6 Refer to the Allow List field, and enter any IP address (for internal or external Web sites) that may be
accessed by the Hotspot user without authentication.
7 Check the Use System Name in Hotspot URL to use the System Name specified on the main Controller
configuration screen as part of the hotspot address.
8 Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent unique
hotspot users for the selected WLAN.
9 Check the Logout on Browser Close button to logout hotspot users from the network when they close
their web browsers.
10 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
11 Click OK to use the changes to the running configuration and close the dialog.
12 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring an Advanced Hotspot (Using the Local Radius Server). The example below shows how to create
and upload a customized login, failed and welcome page onto the controller. This example uses the
controller's local AAA server.
To define a hotspot using the controller's local Radius server:
1 Select Network > Wireless LANs from the main menu tree.
2 Select an existing WLAN from those displayed within the Configuration tab.
3 Click the Edit button.
4 Select the Hotspot button from within the Authentication field.
5 Select the Config... button.
Summit WM3000 Series Controller System Reference Guide
129