Extreme Networks Summit WM3000 Series Reference Manual page 239

NOTE
DHCP Server setting updates are only implemented when the controller is restarted.
NOTE
When using the controller's internal DHCP server ensure that traffic can pass on UDP ports 67 & 68 between the
controller and the clients receiving DHCP information.
To configure DHCP:
1 Select Services > DHCP Server from the main menu tree.
2 Select the Enable DHCP Server checkbox to enable the controller's internal DHCP Server for use with
global pools.
3 Select the Ignore BOOTP checkbox to bypass a BOOTP request.
4 Define an interval (from 1 -10 seconds) for the Ping timeout variable. The controller uses the timeout
to intermittently ping and discover whether the client requested IP address is already used.
5 Refer to the following as displayed within Network Pool field.
Pool Name
Summit WM3000 Series Controller System Reference Guide
Displays the name of the IP pool from which IP addresses can be issued
to DHCP client requests on the current interface. The pool is the range of
IP addresses available.
239