Extreme Networks Summit WM3000 Series Reference Manual page 344

Controller Security
1 Select Security > Wireless Firewall from the main tree menu.
2 Select the Configuration tab.
3 Click the L2 tab.
4 The L2 tab contains the following information:
Interface Name
ARP Rate
DHCP Trust
ARP Trust
Broadcast Storm
Threshold
Multicast Storm
Threshold
344
Displays the interface associated with the Layer 2 firewall. Available Layer
2 interfaces are ge 1-8 and up1.
Address Resolution Protocol
Displays the
between 1 and 1000000
Displays whether or not the DHCP servers configured on the controller are
trusted by the Layer 2 firewall. If DHCP is trusted, DHCP traffic will not
be subjected to the Layer 2 firewall rules. When the DHCP servers is
trusted a green checkmark will be displayed. When the DHCP servers are
not trusted a red "X" will be displayed.
Displays whether or not the ARP is trusted by the Layer 2 firewall. If ARP
is trusted, ARP traffic will not be subjected to the Layer 2 firewall rules.
When the ARP interface is trusted a green checkmark will be displayed.
When the ARP interface is not trusted a red "X" will be displayed.
Displays the Broadcast Storm Threshold for each interface. When the rate
of broadcast packets exceeds the high threshold configured for an
interface, packets are throttled till the rate falls below the configured
rate. Thresholds are configured in terms of packets per second. The
threshold range is 1-1000000 packets per second.
Displays the Multicast Storm Threshold for each interface. When the rate
of multicast packets exceeds the high threshold configured for an
interface, packets are throttled till the rate falls below the configured
rate. Thresholds are configured in terms of packets per second. The
threshold range is 1-1000000 packets per second.
(ARP) rate. Rates can be
Summit WM3000 Series Controller System Reference Guide