Extreme Networks Summit WM3000 Series Reference Manual page 429

3 Refer to the fields within the V3 screen for the following information:
User Name
Access Control
Authentication
Encryption
Status
4 Highlight an existing v3 entry and click the Edit button to modify the password for the Auth
Protocol and Priv Protocol.
For additional information, see
5 Highlight an existing SNMP v3 User Name and click the Enable button to enable the log-in for the
specified user. When selected the status of the user is defined as active.
6 Highlight an existing SNMP v3 User Name and click the Disable button to disable the log-in for the
specified user. When selected the status of the user is defined as inactive.
Summit WM3000 Series Controller System Reference Guide
Displays a read-only SNMP v3 username of operator or Admin. An
operator typically has an Access Control of read-only and an Admin
typically has an Access Control of read/write.
read-only
Displays a (R) access or
Read-only access allows the user (when active) to retrieve information,
while read/write access grants the user modification privileges.
Displays the current authorization scheme used by this user for v3 access
to the controller. Click the Edit
change authentication keys.
Displays the current Encryption Standard (DES) protocol the user must
satisfy for SNMP v3 access to the controller. Click the
modify the password required to change encryption keys.
Displays whether this specific SNMP v3 User Name is active on the
controller. For more information, see
on page 431.
"Editing an Existing SNMP v1/v2 Community Name" on page 427
read/write
(RW) access for the v3 user.
button to modify the password required to
Edit
"Accessing SNMP v2/v3 Statistics"
button to
429