Extreme Networks Summit WM3000 Series Reference Manual page 491

3 Ensure the Adopt unconfigured radios automatically option is NOT selected.
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to access points when automatically
adopted.
NOTE
For IPSec deployments, refer to
page 494 and take note of the CLI commands in red and associated comments in green.
Any WLAN configured on the controller becomes an extended WLAN by default for an AP.
4 Select Network > Wireless LANs from the controller main menu tree.
5 Select the target WLAN you would like to use for AP support from those displayed and click the
Edit button.
6 Select the Independent Mode checkbox.
Selecting the checkbox designates the WLAN as independent and prevents traffic from being
forwarded to the controller. Independent WLANs behave like WLANs as used on a a standalone
access point. Leave this option unselected (as is by default) to keep this WLAN an extended WLAN
(a typical centralized WLAN created on the controller).
Summit WM3000 Series Controller System Reference Guide
"Sample Controller Configuration File for IPSec and Independent WLAN" on
491