Extreme Networks Summit WM3000 Series Reference Manual page 54

Controller Information
To view configuration details for the uplink and downlink ports:
1 Select Controller > Port from the main menu tree.
2 Select the Configuration tab to display the following read-only information:
Name
MAC Address
Admin Status
Speed
Duplex
Medium
3 Select a port and click the Edit button to modify the port configuration. For additional information,
see "Editing the Port Configuration" on page
54
Displays the current port name. The port names available vary by
controller.
Summit WM3600: ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1
Summit WM3700: ge1, ge2, ge3, ge4, me1
Displays the port's MAC Address. This value is read-only, set at the
factory and cannot be modified.
Displays whether the port is currently Up or Down.
Displays the current speed of the data transmitted and received over the
port.
Displays the port as either half or full duplex.
Displays whether the connection medium is cooper or not.
55.
Summit WM3000 Series Controller System Reference Guide