Adding An Ip Address For A Dns Server; Configuring Global Settings - Extreme Networks Summit WM3000 Series Reference Manual

Adding an IP Address for a DNS Server

Add an IP address for a new domain server using the Add screen.
1 Click the Add button within the Domain Network System screen.
The new Configuration screen displays enabling you to add IP address for the DNS Server.
2 Enter the Server IP Address to define the IP address of the new static domain name server.
3 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
4 Click OK to use the changes to the running configuration and close the dialog.
5 Click Cancel to close the dialog without committing updates to the running configuration.

Configuring Global Settings

Use the Global Settings screen to query domain name servers to resolve domain names to IP addresses.
Use this screen to enable/disable the Domain look up, which allows you to use commands like ping,
traceroute etc. using hostnames rather than IP addresses.
1 Click the Global Settings button in the main Domain Network System screen.
A Configuration screen displays for editing the DNS settings of the server.
2 Select the Domain Look Up checkbox to enable the controller to query domain name servers to resolve
domain names to IP addresses.
Summit WM3000 Series Controller System Reference Guide
89