Wlan Level Configuration - Extreme Networks Summit WM3000 Series Reference Manual

Controller Security
DHCP Trust
ARP Trust
ARP Rate
5 If the properties of an existing WLAN firewall setting fulfill to your needs but still require
modification to better filter traffic, select the WLAN and click the Edit button.
6 If an existing WLAN firewall rule is now obsolete, select it from those listed and click the Delete
button.
7 Click the Add button to create a new WLAN firewall rule. For more information, see
Configuration" on page

WLAN Level Configuration

To add new WLAN firewall rules:
1 Select Security > Wireless Firewall from the main tree menu.
2 Click the Configuration tab.
3 Click the WLAN tab.
4 Click the Add button.
348
Displays whether the Interface is DHCP trusted or not, If the interface is
DHCP trusted then the DHCP Request will forward to the External DHCP
Server otherwise it will not. Always the Internal DHCP servers are trusted
in nature. When ever the interface is DHCP trusted, then it is marked as
GREEN and if it not DHCP trusted it will mark in RED "X".
Displays whether or not the ARP is trusted by the Layer 2 firewall. If ARP
is trusted, ARP traffic will not be subjected to the Layer 2 firewall rules.
When the ARP interface is trusted a green checkmark will be displayed.
When the ARP interface is not trusted a red "X" will be displayed.
Displays the ARP rate threshold. The ARP threshold determines the
number of ARP packets permissible per second. Rates can be between 0
and 1000000
348.
Summit WM3000 Series Controller System Reference Guide
"WLAN Level