Extreme Networks Summit WM3000 Series Reference Manual page 422

Controller Security
4 Use the From drop-down menu to specify the location from which the log file is sent. If only the
applet is available as a transfer location, use the default controller option.
5 Select a target file for the file transfer from the File drop-down menu.
The drop-down menu contains the log files listed within the Server Certificate screen.
6 Use the To drop-down menu to define whether the target log file is to be sent to the system's local
disk (Local Disk) or to an external server (Server).
7 Provide the name of the file to be transferred to the location specified within the Target field.
8 Use the Using drop down-menu to configure whether the log file transfer is sent using FTP or TFTP.
9 Enter the IP Address of destination server or system receiving the target log file.
10 Enter the User ID credentials required to send the file to the target location.
Use the user ID for FTP transfers only.
11 Enter the Password required to send the file to the target location using FTP.
12 Specify the appropriate Path name to the target directory on the local system disk or server as
configured using the "To" parameter.
If the local server option is selected, use the browse button to specify the location on the local server.
13 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
14 Click the Transfer button when ready to move the target file to the specified location.
Repeat the process as necessary to move each desired log file to the specified location.
15 Click the Abort button to terminate the transfer before completion. The abort option is helpful if
certificate credentials prove problematic in the transfer process.
16 Click the Close button to exit the screen after a transfer. There are no changes to save or apply.
422
Summit WM3000 Series Controller System Reference Guide