Debugging The Applet - Extreme Networks Summit WM3000 Series Reference Manual

12 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
13 Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14 If a problem condition is discovered during the file transfer, click the Abort button to terminate the
transfer.
15 Click the Close button to exit the dialogue and abandon the transfer.

Debugging the Applet

Refer to the Applet Debugging screen to debug the applet. This screen allows you to view and debug
system events by a criticality level you define.
1 Select Diagnostics > Applet Debugging from the main menu.
2 To use this window, select the Enable Web-UI Debug Mode checkbox.
The Applet Debugging field is partitioned into the following editable fields:
Send log message to a file.
●
Use SNMP v2 only.
●
Message Severity.
●
What kinds of message should be seen.
●
3 Select the Send log message to a file checkbox if you wish to store the log message.
Summit WM3000 Series Controller System Reference Guide
471