Extreme Networks Summit WM3000 Series Reference Manual page 227

1 Select a row from the port table and click the Edit button.
The following MSTP Port parameters can be reconfigured.
Port Index
Admin MAC Enable
Port auto Edge
Port Guard Root
PortFast BPDU Filter
Port FastBPDU Guard Enable this option to change the status of the
Port Version
Summit WM3000 Series Controller System Reference Guide
Displays the read-only Port Index.
Displays the status of the Admin MAC Enable. A green check mark
indicates the status as enabled.
Select the checkbox to use the port as an edge port.
Port Guard Root Select this checkbox to enable guard root for this port.
Typically, each guard root port is a designated port, unless two or more
ports (within the root bridge) are connected together. If the bridge
receives superior (BPDUs) on a guard root-enabled port, the guard root
moves the port to a root-inconsistent STP state. This state is equivalent
to a listening state. No data is forwarded across the port. Thus, the guard
root enforces the root bridge position.
Enable this option to change the status of the
Select a value to reconfigure the port version.
Port Fast BPDU Filter
.
Port Fast BPDU Guard.
227