Download Print this page

Extreme Networks Summit WM3000 Series Reference Manual page 86

Summit wm3000 series controller system software version 4.0

Advertisement

Network Setup
1 Select Network from the main menu tree.
2 Refer to the following information to discern if configuration changes are warranted:
DNS Servers
IP Routes
Additional Resolution
Entries
Controller Virtual
Interfaces
Wireless LANs
Mobile Units
Access Points
Radios
The Apply and Cancel buttons are greyed out within this screen, as there is no data to be configured
or saved.
86
Displays the number of DNS Servers configured thus far for use with the controller.
For more information, see
"Viewing Network IP Information" on page
Displays the number of IP routes for routing packets to a defined destination. For
information on defining IP Routes, see
Displays the number of layer three (IP) address to layer two (MAC) address
mappings. For more information, see
Displays the number of virtual interfaces (VLANs) defined thus far for the
controller. New VLANs can be defined or existing VLANs can be modified as
needed. For more information, see
page
99.
Displays the number of WLANs currently defined on the controller. The controller
has 32 default WLANs. New WLANs can be added as needed, and their
descriptions, VLAN assignments and security schemes modified. By default all
WLANs are displayed with default values. The Summit WM3600 supports a
maximum of 32 WLANs. The Summit WM3700 supports a maximum of 256
WLANS. For more information, see
page
109.
Displays the number of MUs currently associated to (and interacting with) the
controller. The details of individual MUs can be displayed as needed. For more
information, see
"Viewing Associated MU Details" on page
Access Points
Displays the number of
can be added or existing APs can have their VLAN assignments changed, their
descriptions modified and their current authentication and encryption schemes
modified. For more information, see
page
176.
Displays the number of AP radios detected over the controller managed network.
Displayed with this information is the number of radios detected that have been
adopted by the controller. For more information, see
Radios" on page
177.
"Configuring IP Forwarding" on page
"Viewing Address Resolution" on page
"Configuring Controller Virtual Interfaces" on
"Viewing and Configuring Controller WLANs" on
166.
(APs) active on the controller. Access points
"Viewing Access Point Information" on
"Configuring Access Point
Summit WM3000 Series Controller System Reference Guide
87.
90.
93.

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Summit wm3600Summit wm3700