Extreme Networks Summit WM3000 Series Reference Manual page 45

3 Refer the System field to view or define the following information:
System Name
Location
Contact
Uptime
Firmware
AP Licenses
Date (MM/DD/YYYY)
Time (HH:MM:SS)
Time Zone
Country
4 Click the Restart button to reboot the controller. The controller itself does not include a hardware
reset feature.
CAUTION
When rebooting the controller, the Radius Server will also be restarted regardless of its state before the reboot.
5 Click the Shutdown button to shutdown and power off the controller.
NOTE
On the Summit WM3600 and Summit WM3700 the shutdown command will shutdown the controller but the
fans on the controller will remain on.
6 Click the Show Dashboard button to display a screen with important indicators of controller health
and status. For more information, see
Details screen is recommended before new configurations are employed that utilize increased
controller bandwidth.
Summit WM3000 Series Controller System Reference Guide
Displays the designated system name. Provide a system name serving as
a reminder of the user base the controller supports (engineering, retail,
etc.).
The Location parameter serves as a reminder of where the controller can
be found. Define the System Name as a specific identifier of the
controller's location. Use the System Name and Location parameters
together to optionally define the controller name by the radio coverage
type it supports and physical location. For example, "second floor
engineering."
Contact
Displays a value for system administration and troubleshooting.
This name should be the network administrator responsible for controller
operations.
Displays the current operational time for the device name defined within
the System Name field. Uptime is the cumulative time since the
controller was last rebooted or lost power.
Displays the current firmware version running on the controller. This
version should be periodically compared to the most recent version
available on the Extreme Networks Web site, as versions with increased
functionality are periodically released.
Displays the number of Access Point licenses currently available for the
controller. This value represents the maximum number of Access Points
the controller is licensed to adopt.
Displays the day, month and year currently used with the controller.
Displays the time of day used by the controller.
Use the drop-down menu to specify the time zone used with the
controller. Adjusting the time zone will in turn, cause an adjustment to
the time displayed.
Use the drop-down menu to specify the correct country of operation.
Selecting the country incorrectly could render your controller as operating
illegally.
"Controller Dashboard Details" on page 46. Referencing the
45